SKF bearings for gearbox rebuilds, reducers, drive shafts and equipment overhauls
Start from the equipment you are repairing. Drive Shafts Company supplies SKF roller and ball bearings for every shaft position, from a single replacement to the full set for a rebuild.
A complete gearbox rebuild usually involves several bearings in one assembly, and suffixes, execution and matched sets directly affect its quality.
Repairing gearboxes, reducers and drive shafts means selecting by shaft position. A bearing that fits the input shaft tells you little about the intermediate or output position.
Pairing deserves the same care. A matched or grouped arrangement can only perform as designed when the complete set and its required suffix are specified together.
Alternatives need checking against the original arrangement. Matching dimensions do not prove that a replacement meets every requirement in the gearbox specification.
Our gearbox rebuild shop sources SKF roller bearings for reducers and drive shafts. The supplier confirms the clearance class and cage type we specify, and every bearing arrives with the correct execution. Our rebuilt gearboxes are running longer between overhauls.
Dieter Schuster
We had a large reducer fail at our cement plant. We needed SKF spherical roller bearings for the input shaft urgently. The supplier identified the correct SKF reference, shipped within 24 hours, and the reducer was back in service within a week.
Mahmoud Hassan
What we value is that they understand gearbox bearing arrangements. They asked about the floating and locating bearing positions before confirming the SKF references. On one order, they flagged that a bearing was at the load limit and suggested a heavier series. That prevented a repeat failure.